As a modern industry full of challenges, the microelectronics industry has put forward higher requirements for the accuracy of the corresponding filtration and separation products with its rapid development. Advanced semiconductor manufacturing require extremely clean fluid streams thereby driving need for high-end filtration and purification solutions. Tighter contamination control can significantly improve yield.
At the same time, the professionalism and service of suppliers have become important factors for our customers. In order to adapt to the rapid development of the industry, MBorst Filtration have also developed many patented products that meet new processes and new markets, which have received good market response, and have also been unanimously recognized by customers in the chip manufacturing, liquid display manufacturing, and lithium battery industries.
CMP
PVD copper plating
Wet etch clean
Photoresist
Chemical delivery system
General Filtration
Final Cleaning and DI Water filtration
Plating, Etching, Stripper chemicals
Chemicals of acid, bases and solvents (selected applications)
Engineering or Equipment companies requiring cartridge housings
MPF series filter cartridges are made of PTFE membrane. lt has excellent resistance to organic and inorganic chemical corrosion. The absolute filtration membrane ensures absolute filtration efficiency and is suitable for various high-demand occasions.
Features
High flux, high efficiency
Low initial pressure difference, large flow rate
Good adsorption
Application
Chemical reagents, high-purity reagents
Terminal filtration of ink industry
Solvent sterilization
Corrosive liquid, strong oxidizing liquid sterilization and particle removal
MPP-SA2 series filter cartridges are made of multi-layer gradient pore size membrane which achieves high dirt holding space and large filter area.
The gradient structure from coarse to fine makes the upstream pore size of the filter cartridge coarser and the downstream smaller, which efficiently classify and intercept particles to prolong theservice life. It is more suitable for liquid filtration with high particle content, colloid and certain viscosity.
Features
Gradient filtration Gradient structure has a grading filtering effect on theparticles, making the filter cartridge has a higher dirt holdingcapacity and a longer service life.
High efficiency
Broad chemical compatibility
Application
High-generation line LCD panel manufacturing process
The cage, support layer and gaskets of MAPF series are all made of PTFE, giving it a perfluoro-like structure. lt is especially suitable for strong corrosive and high temperature liquid filtration. MHAPF is made of modified hydrophilic PTFE. No need to pre-wetting.
Features
PTFE membrane + PVDF shell make the filter element has a perfluorinated structure, which is more suitable for the filtration of strong corrosive acids and organic solvents
Especially suitable for 49% HF filtration
100% Integrity Tested
Application
Hydrofluoric acid, nitric acid, sulfuric acid, hydrochloric acid and other strong acid
Various high temperature fluid over 100℃
Various strong solvents such as chloroform, dimethyl, isopropanol, etc
MFA Series is welded by a single-layer stainless steel mesh with simple structure, easy cleaning and long service life. High-quality stainless steel mesh and high-level welding technology ensure the filtration performance.
It is especially suitable for pre-filtration of high-viscosity liquids, particularly for lithium battery slurry.
Features
Large dirt holding capacity, high filtration precision, slow pressure rise, long replacement cycle
Corrosion resistant to various acids, alkalis, organic solvents and pharmaceuticals
High porosity and excellent permeability, small pressure loss, large flow rate, high strength and reusable
Application
Pre-filtration of high viscosity liquids
Especially suitable for pre-filtration of lithium battery slurry
MFB Series is made of multi-layers stainless steel mesh. The pleated structure effectively increases the filtration area, which is 3-4 times larger than ordinary stainless steel mesh filter cartridges.
It has large flux, large dirt-holding capacity, and long service life. Special pleated technology results in smaller creases and greater stability.
Features
Multi-layer sintering, optimized combination, high strength
Excellent permeability, low filtration pressure loss
MTI series is made of high-purity titanium powder and sintered in high temperature and high vacuum. It has a good solid-liquid separation for low-viscosity liquids containing many steel particles.
Filter housing is designed with a swing structure and can be flipped 180°, making it easy to clean, remove sediment and collect rigid particles.
Features
High temperature resistant, stainless steel up to 600oC, special alloys up to 900oC
Robust construction, no auxiliary support required, can be directly installed into the equipment, able to withstand compression changes or shocks
Excellent chemical compatibility, corrosion resistance
High pollutant capacity, washable and eusable and long service life
Application
Filtration of polyethylence ,polypropylence,nylon ,polyester and viscose
Recovered catalyst, polymers, filtreing
Filtration of hydraulic fluids, fuel and lubricant
Various types of high-temperature high-pressure high-precision occasions
0
0
MBorst is Committed to become the world's leading filtration solutions provider.
?
?
Opening Hours Monday-Friday: 9:00am-5:00pm Closed on All Nationally Observed Holidays
English
